The Acesol El Calor Azul® F1 thermal emitters are manufactured by means of innovative engineering that makes the emitter use energy in a precise manner. This is one of the keys to their performance which, using less power, is higher than that of other electric heating systems and other similar products. Its average consumption during 10 hours of heating is of approximately 40% regarding 100% of the nominal power.

The use of top quality materials and advanced components, such as its electronic PID controller or its high sensitivity detection probe (0.2 ºC), substantially improves the response speed and heat transmission, as opposed to other control methods.

If to this we add its high performance thanks to its high thermal transfer thermoconductor fluid, its inalterable high quality and heat transmission injected aluminium and the energy contribution of its high thermal conductivity and low electricity consumption thermal resistances, we get heating with very high energy efficiency standards or, in other words, El Calor Azul®

Beyond the energy efficiency and the quality of its components, the distinctive characteristic of Acesol el Calor Azul® is the concern for ergonomics, the convenience for the user and the maximum safety for your home.

The LCD screen and the control panel are located in the upper part of the device, allowing forced positions to be avoided and enabling its handling for persons with sight and mobility impairments

The Acesol F1 thermal emitters are provided with the greatest advances and best technology regarding safety. The DSS® system, exclusive to Acesol El Calor Azul®, which manages the internal conditions of the apparatus providing it with the maximum safety standards, or its fireproof casings built with ABS.V0 material (the highest value in the scale measuring behaviour regarding fire, fireproof and self-extinguishing), with high mechanical performance, non-toxic, halogen-free and with UV protection.

A characteristic that stands out is the great versatility and simplicity regarding its installations. The installation of the Acesol El Calor Azul® thermal emitter heating installation does not require any kind of civil works in your home, or any later maintenance. It is so simple that anyone could install it in 2 to 3 hours.

On the other hand, it is so easy to transport and install that it is possible to exchange the thermal emitters in the case of rooms or situations demanding greater heat contribution, making this heating very versatile.

We cannot forget the peace of mind enjoying healthy heat provides, as it does not dry up the environment, consume oxygen or create temperature differences. The thermal transfer is made uniformly by means of convection, conduction and radiation. It is recommended by allergists for persons with breathing problems such as allergies, asthma or silicosis.

Great LCD display screen. With white characters on a blue lit background. Its pleasant light can be used as a night light.

Complete Programming. Each of the 24 hours of the day can be programmed independently and it has 9 default programmes configured for the most common heating situations.

Ergonomic design. The controls are located in the upper part and the screen is designed so as to offer a high display (it can be seen from almost any angle), avoiding getting into forced positions and enabling its handling for persons with sight and mobility impairments.

DSS® Security System. This innovative security system, exclusive to Acesol heaters, serves to manage internal apparatus conditions.

PID electronics. Integrated control system with electronic thermostat. Its electronic P.I.D. management system allows the optimisation of the operation as it has a fast detection environmental temperature sensor (0.2Cº), whose readings are interpreted by a microcontroller by means of a management algorithm and, depending on these, the operating command is given, for the least amount of time possible, to achieve the objective temperature set by the user, using the minimum energy contribution.

Fireproof, electronic casing, with top quality finish, made of ABS.V0.*(self-extinguishing) and possessing excellent mechanical features, halogen free components and anti-UV protection. Designed in smooth and harmonious shapes for perfect integration with the aluminium body.

ºC or ºF Operation Selection, Ideal for persons from other countries that use this measurement. Selection to be permanently lit or to light up only during adjustments.

Permanent LCD screen lighting, or only during setting operations.

Injected aluminium with double-coated finish, weather and corrosion proof that has been perfectly designed to provide optimal heat transfer.

High heat transfer fluid specially developed for this application, that enables maximum heat content per unit volume, which in turn translates into efficient operation.

Metal-clad resistors built in AISI-304 stainless steel tube, which possesses high heat conductivity, low power consumption with anti-damp system.