The Acesol El Calor Azul® Future LCD thermal emitters are manufactured by means of innovative engineering that makes the emitter use energy in a precise manner. This is one of the keys to their performance which, using less power, is higher than that of other electric heating systems and other similar products. Its average consumption during 10 hours of heating is of approximately 33% regarding 100% of the nominal power.

The use of top quality materials and advanced components, such as its electronic PID controller or its high sensitivity detection probe (0.1 ºC), substantially improves the response speed and heat transmission, as opposed to other control methods.

If to this we add its high performance thanks to its high thermal transfer thermoconductor fluid, its inalterable high quality and heat transmission injected aluminium and the energy contribution of its high thermal conductivity and low electricity consumption thermal resistances, we get heating with very high energy efficiency standards or, in other words, El Calor Azul®.

One of the concepts distinguishing Acesol El Calor Azul, is that of manufacturing heating to for our homes and to be handled by our families. For this, apart from innovating regarding design, efficiency and a large differentiated range, we have improved the ergonomics and safety, reaching very high levels

Ergonomics as a Method for Preventing Injuries

Its exceptional ergonomics, both regarding handling and display make its management simple and attractive.

Its high-resolution screen with a great display and its handling simplicity by means of 3 keys located on the upper part, allows the adjustments to be viewed from all angles, in an easy an ergonomic manner, avoiding injuries and enabling its handling for people with sight and mobility impairments.

Also, the Acesol remote control works in the same way as the emitter and can store different programmes to later send them to the emitters, in this way providing greater convenience.

The Maximum Safety for your Home

The Acesol El Calor Azul® thermal emitters are provided with the greatest advances and best technology regarding safety. The DSS® system, exclusive to Acesol El Calor Azul®, which manages the internal conditions of the apparatus providing it with the maximum safety standards, or its fireproof casings built with ABS.V0 material (the highest value in the scale measuring behaviour regarding fire, fireproof and self-extinguishing), with high mechanical performance, non-toxic, halogen-free and with UV protection.

Being pioneers in R&D&I and creating a new heating concept makes it possible for us to offer you heating that unites the highest technological levels with the simplest handling.

The Acesol Future LCD emitters are designed to adapt to all spaces, from the most plain to the most sophisticated, either classic or modern.

The availability of casings finished off in mirror qualities (gold, silver and white), introducing smooth and elliptical shapes and plain and luminous colours, allow the emitters to fit in perfectly in any environment.

A characteristic that stands out is the great versatility and simplicity regarding its installations. The installation of the Acesol El Calor Azul® thermal emitter heating installation does not require any kind of civil works in your home, or any later maintenance. It is so simple that anyone could install it in 2 to 3 hours.

On the other hand, it is so easy to transport and install that it is possible to exchange the thermal emitters in the case of rooms or situations demanding greater heat contribution, making this heating very versatile.

We cannot forget the peace of mind enjoying healthy heat provides, as it does not dry up the environment, consume oxygen or create temperature differences. The thermal transfer is made uniformly by means of convection, conduction and radiation. It is recommended by allergists for persons with breathing problems such as allergies, asthma or silicosis.

Great High-resolution LCD display (15 cm2) with white characters on a blue lit background, allowing to view the adjustments standing up and from all angles, in an easy and ergonomic manner, without the need to bend down or to get into uncomfortable positions.

The intensity of the screen adapts automatically according to the environmental luminosity. Its pleasant light is an aid when trying to get to sleep, most of all for children, acting as a night light.

Ergonomic design. The controls are located in the upper part and the screen is designed so as to offer a high display (it can be seen from almost any angle), avoiding getting into forced positions and enabling its handling for persons with sight and mobility impairments.

Complete Programming. It has nine default programmes covering all needs for comfort in any room or premises and four fully-customisable user programmes.

It includes the possibility to programme the temperature desired for each hour of the day, making it more efficient than the rest of the products on the market that only allow adjustments within a range of 3.5ºC (taking into account that a 1ºC difference means an extra consumption of approximately 7%).

Remote Control with all the functions of the emitter. It has memories to store programmes and to send these to the emitters.

There is also the possibility of switching the emitter on/off and of raising/lowering the temperature with infrared remotes by Sony, Philips or other compatible brands.

DSS® Security System. This innovative security system, exclusive to Acesol heaters, serves to manage internal apparatus conditions

PID electronics. Integrated control system with electronic thermostat. Its electronic P.I.D. management system allows the optimisation of the operation as it has a fast detection environmental temperature sensor (0.1Cº), whose readings are interpreted by a microcontroller by means of a management algorithm and, depending on these, the operating command is given, for the least amount of time possible, to achieve the objective temperature set by the user, using the minimum energy contribution. As opposed to other systems that use a relay, this has a practically unlimited number of manoeuvres.

An exclusive PID system has been designed for our emitters, allowing for the advantages of traditional PID (optimum control) but very significantly improving the response speed, and inconvenience implied in traditional P.I.D systems. This speed achieves an exact temperature control and a reaction capacity higher to that of other systems, optimising energy efficiency.

The emitter can be configured for it to disconnect in the case of detecting a sudden temperature drop (morning ventilation, etc.)

Fireproof, electronic casing, with top quality finish, made of ABS.V0.*(self-extinguishing) and possessing excellent mechanical features, halogen free components and anti-UV protection. Designed in smooth and harmonious shapes for perfect integration with the aluminium body.

Keypad Blocking/Unblocking function to avoid unauthorised handling, or operation modifications

Omnipolar switch at the back of the unit, which apart from being hidden also avoids accidental operation.

ºC or ºF Operation Selection, Ideal for persons from other countries that use this measurement. Selection to be permanently lit or to light up only during adjustments.Permanent LCD screen lighting, or only during setting operations.

Injected aluminium with double-coated finish, weather and corrosion proof that has been perfectly designed to provide optimal heat transfer. (They do not deteriorate with the passing of time, manage to maintain their appearance and are not attacked by the atmosphere, or by the liquid they contain).

High heat transfer fluid specially developed for this application, that enables maximum heat content per unit volume, which in turn translates into efficient operation.

Metal-clad resistors built in AISI-304 stainless steel tube, which possesses high heat conductivity, low power consumption with anti-damp system.